Description
Jiangsu Liangyi is professional manufacturer of 1.4652,X1CrNiMoCuN24-22-8,X1CrNiMoCuN24.22.8,X1CrNiMoCuN24228 open die forging parts and seamless rolled steel forged rings from china
Following is the shape of 1.4652,X1CrNiMoCuN24-22-8,X1CrNiMoCuN24.22.8,X1CrNiMoCuN24228 forging steel material that we could do is:1.4652 Forged Steel round bars square bars Flat bars Rectangles Bars Rods,1.4652 Forged forging steel rings seamless rolled rings,1.4652 Forged Forging Steel Hubs housing shell Sleeves Bushes Bushing Cases Hollow Bars,X1CrNiMoCuN24-22-8 Forged Forging Steel Discs Disks Blocks plates,X1CrNiMoCuN24-22-8 Forged Forging Steel Pipe Tubes Tubings Piping Shells Casings Case barrels Housings.
1.4652 is a is an austenitic stainless steel which due to its high content of molybdenum and nitrogen possesses excellent resistance to pitting and crevice corrosion. It also has very high resistance to general corrosion in acids, especially those containing halide ions. Furthermore, its mechanical strength is high in comparison with conventional austenitic grades.
FOllowing is production standard of 1.4652 forged material
EN 10088-2: 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10088-1: 2005 Stainless steels. List of stainless steels
Chemical composition of 1.4652,X1CrNiMoCuN24-22-8,X1CrNiMoCuN24.22.8,X1CrNiMoCuN24228 forging turbine parts is as
Iron (Fe) 38.3 to 46.3
Chromium (Cr) 23 to 25
Nickel (Ni) 21 to 23
Molybdenum (Mo) 7.0 to 8.0
Manganese (Mn) 2.0 to 4.0
Nitrogen (N) 0.45 to 0.55
Copper (Cu) 0.3 to 0.6
Silicon (Si) 0 to 0.5
Phosphorus (P) 0 to 0.030
Carbon (C) 0 to 0.020
Sulfur (S) 0 to 0.0050
mechanical property of for 1.4652,X1CrNiMoCuN24-22-8,X1CrNiMoCuN24.22.8,X1CrNiMoCuN24228 forged round bars is as follow
Rm - Tensile strength (MPa) (+A) 750-1000
Rp0.2 0.2% proof strength (MPa) (+A) 430
KV - Impact energy (J) longitud., (+A) +20°100
A - Min. elongation at fracture (%) (+A) 40
Brinell hardness (HB): (+A) 310
NON DESTRUCTIVE EXAMINATION of 1.4652 forged rings Personnel performing NDE shall be qualified in accordance with the manufacturer's documented training programme that is based on the requirements specified in ISO 9712,or ASNT SNT-TC-
The manufacturer or supplier shall have written procedures.
Ultrasonic Examination of 1.4652 forged shafts:As far as practical,the entire volume of the supplied material shall be volumetrically inspected by Ultrasonic means after heat treatment for mechanical properties."
Ultrasonic examination of 1.4652 forged parts shall be performed in accordance with the flat-bottom-hole procedures specified in ASTM A388,except that the immersion method may be used,and ASTM E428 for calibration test blocks.
The following acceptance criteria apply of 1.4652 forged bars:no single indication exceeding reference distance amplitude curve;no multiple indications exceeding 50%of reference distance amplitude curve.Multiple
indications are defined as two or more indications(each exceeding 50% of the reference distance amplitude curve)within 13 mm (1/2 in)of each other in any direction."
We have following inspection equipment to inspection all our 1.4652 forging shafts
Tensile press
Charpy pendulum (up to – 90ºC)
Hardness testers
Scale
Thermometer
Spectrometer
Scales
Temperature control thermocouples
Continuous monitoring systems and process recording (heating, ring rolling and heat treatment)
Measuring laser
Pyrometer
Hardness testers
Laser measure
Comparators
Gauges
Micrometres
Bore gauges
UT equipment
MT equipment
Laser tracker
Fluorescent particles for liquid penetrant inspection
Radius gauges
Threaded plugs
Parallelism measuring devices
Roughness testers
Thickness gauges
Gauge blocks and rods
Light meters
Mass weight
Goniometers
Welcome your inquiry of 1.4652, X1CrNiMoCuN24-22-8 forging parts
Following is the shape of 1.4652,X1CrNiMoCuN24-22-8,X1CrNiMoCuN24.22.8,X1CrNiMoCuN24228 forging steel material that we could do is:1.4652 Forged Steel round bars square bars Flat bars Rectangles Bars Rods,1.4652 Forged forging steel rings seamless rolled rings,1.4652 Forged Forging Steel Hubs housing shell Sleeves Bushes Bushing Cases Hollow Bars,X1CrNiMoCuN24-22-8 Forged Forging Steel Discs Disks Blocks plates,X1CrNiMoCuN24-22-8 Forged Forging Steel Pipe Tubes Tubings Piping Shells Casings Case barrels Housings.
1.4652 is a is an austenitic stainless steel which due to its high content of molybdenum and nitrogen possesses excellent resistance to pitting and crevice corrosion. It also has very high resistance to general corrosion in acids, especially those containing halide ions. Furthermore, its mechanical strength is high in comparison with conventional austenitic grades.
FOllowing is production standard of 1.4652 forged material
EN 10088-2: 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10088-1: 2005 Stainless steels. List of stainless steels
Chemical composition of 1.4652,X1CrNiMoCuN24-22-8,X1CrNiMoCuN24.22.8,X1CrNiMoCuN24228 forging turbine parts is as
Iron (Fe) 38.3 to 46.3
Chromium (Cr) 23 to 25
Nickel (Ni) 21 to 23
Molybdenum (Mo) 7.0 to 8.0
Manganese (Mn) 2.0 to 4.0
Nitrogen (N) 0.45 to 0.55
Copper (Cu) 0.3 to 0.6
Silicon (Si) 0 to 0.5
Phosphorus (P) 0 to 0.030
Carbon (C) 0 to 0.020
Sulfur (S) 0 to 0.0050
mechanical property of for 1.4652,X1CrNiMoCuN24-22-8,X1CrNiMoCuN24.22.8,X1CrNiMoCuN24228 forged round bars is as follow
Rm - Tensile strength (MPa) (+A) 750-1000
Rp0.2 0.2% proof strength (MPa) (+A) 430
KV - Impact energy (J) longitud., (+A) +20°100
A - Min. elongation at fracture (%) (+A) 40
Brinell hardness (HB): (+A) 310
NON DESTRUCTIVE EXAMINATION of 1.4652 forged rings Personnel performing NDE shall be qualified in accordance with the manufacturer's documented training programme that is based on the requirements specified in ISO 9712,or ASNT SNT-TC-
The manufacturer or supplier shall have written procedures.
Ultrasonic Examination of 1.4652 forged shafts:As far as practical,the entire volume of the supplied material shall be volumetrically inspected by Ultrasonic means after heat treatment for mechanical properties."
Ultrasonic examination of 1.4652 forged parts shall be performed in accordance with the flat-bottom-hole procedures specified in ASTM A388,except that the immersion method may be used,and ASTM E428 for calibration test blocks.
The following acceptance criteria apply of 1.4652 forged bars:no single indication exceeding reference distance amplitude curve;no multiple indications exceeding 50%of reference distance amplitude curve.Multiple
indications are defined as two or more indications(each exceeding 50% of the reference distance amplitude curve)within 13 mm (1/2 in)of each other in any direction."
We have following inspection equipment to inspection all our 1.4652 forging shafts
Tensile press
Charpy pendulum (up to – 90ºC)
Hardness testers
Scale
Thermometer
Spectrometer
Scales
Temperature control thermocouples
Continuous monitoring systems and process recording (heating, ring rolling and heat treatment)
Measuring laser
Pyrometer
Hardness testers
Laser measure
Comparators
Gauges
Micrometres
Bore gauges
UT equipment
MT equipment
Laser tracker
Fluorescent particles for liquid penetrant inspection
Radius gauges
Threaded plugs
Parallelism measuring devices
Roughness testers
Thickness gauges
Gauge blocks and rods
Light meters
Mass weight
Goniometers
Welcome your inquiry of 1.4652, X1CrNiMoCuN24-22-8 forging parts
