Description
Jiangsu liangyi Co Limited produce forged steel frac pump fluid ends, forging steel mud pump fluid end modules, forged steel hydraulic fracturing high pressure pump fluid end body,forging quintuplex triplex pump fluid end blocks, forged steel Cementing Pump fluid ends from china
The material grade of our forging steel pump fluid ends that we could do is AISI 4135, AISI 4130, AISI 4340,AISI 4330V MOD,4330 modified alloy steel,15-5 PH stainless steel,13-8 VIM/VAR,17-4pH,A182-F6NM,custom 450 ESR,A182-F51 (2205),A182－F22, A182－F60, XM25 and so on
The pressure of our forged steel pump fluid end can stand Pressure: 5000 ~ 10000 psi
We could produce forging pump fluid ends by PUMP Brand of NATIONAL, GD, EMSCO, OILWELL, IDECO, DRILLMEC, WEATHERFORD, BOMCO, TSC, EWCO, AMERICAN BLOCK, EWECO, HONGHUA, LS NOV, WIRTH, RONGSHENG and so on
ALl our pump fluid ends forging steel is melted in ultra-high power electric arc furnaces and then refined using advanced ladle metallurgy. Vacuum degassing and vacuum oxygen decarburization (VOD) processes assure optimum steel cleanliness,ESR that depends on clients needs,The remelted variant guarantees the highest purity and homogeneity.
Our forging steel pump fluid ends have Greater strength and ductility,Higher fatigue resistance,Finer grain size,Continuous grain flow,Improved microstructure
In order to make sure that all our finished forged pump fluid have no defects such as interlayer, crack, impurity, looseness and over-burning. All our forging pump fluid ends will do folloowing testing process, non-destructive testing,destructive testing,metallographic inspection,chemical analysis, PMI (Positive Material Identification)
All our forged steel pump fluid ends will have following inspection report:
Chemical composition report; Mechanical properties report; UT test report; Heat treatment report; Dimensions check report.
We could produce forged, heat treatment and rough machined of pump fluid ends, also we could final machined as per clients drawing of pump fluid ends
The material grade of our forging steel pump fluid ends that we could do is AISI 4135, AISI 4130, AISI 4340,AISI 4330V MOD,4330 modified alloy steel,15-5 PH stainless steel,13-8 VIM/VAR,17-4pH,A182-F6NM,custom 450 ESR,A182-F51 (2205),A182－F22, A182－F60, XM25 and so on
The pressure of our forged steel pump fluid end can stand Pressure: 5000 ~ 10000 psi
We could produce forging pump fluid ends by PUMP Brand of NATIONAL, GD, EMSCO, OILWELL, IDECO, DRILLMEC, WEATHERFORD, BOMCO, TSC, EWCO, AMERICAN BLOCK, EWECO, HONGHUA, LS NOV, WIRTH, RONGSHENG and so on
ALl our pump fluid ends forging steel is melted in ultra-high power electric arc furnaces and then refined using advanced ladle metallurgy. Vacuum degassing and vacuum oxygen decarburization (VOD) processes assure optimum steel cleanliness,ESR that depends on clients needs,The remelted variant guarantees the highest purity and homogeneity.
Our forging steel pump fluid ends have Greater strength and ductility,Higher fatigue resistance,Finer grain size,Continuous grain flow,Improved microstructure
In order to make sure that all our finished forged pump fluid have no defects such as interlayer, crack, impurity, looseness and over-burning. All our forging pump fluid ends will do folloowing testing process, non-destructive testing,destructive testing,metallographic inspection,chemical analysis, PMI (Positive Material Identification)
All our forged steel pump fluid ends will have following inspection report:
Chemical composition report; Mechanical properties report; UT test report; Heat treatment report; Dimensions check report.
We could produce forged, heat treatment and rough machined of pump fluid ends, also we could final machined as per clients drawing of pump fluid ends
