Description
Jiangsu Liangyi is professional manufacturer of 1.6358,1.6354,X2NiCoMo18-9-5,X2NiCoMo1895,X2NiCoMo18.9.5 open die forging parts and seamless rolled steel forged rings from china
Following is the shape of 1.6358,1.6354,X2NiCoMo18-9-5,X2NiCoMo1895,X2NiCoMo18.9.5 forging steel material that we could do is: 1.6358 Forged Steel round bars square bars Flat bars Rectangles Bars Rods,1.6358 Forged forging steel rings seamless rolled rings,X2NiCoMo18-9-5 Forged Forging Steel Hubs housing shell Sleeves Bushes Bushing Cases Hollow Bars,X2NiCoMo18-9-5 Forged Forging Steel Discs Disks Blocks plates,1.6358 Forged Forging Steel Pipe Tubes Tubings Piping Shells Casings Case barrels Housings.
Following is forging products of 1.6358,1.6354,X2NiCoMo18-9-5,X2NiCoMo1895,X2NiCoMo18.9.5 material that is used in following industry
1.6358 Forged Forging Turbine and Compressor Labyrinth Shaft Seals
1.6358 Forged Forging Valve Balls,valve Bonnets,valve Body Bodies ,valve Stems,valve closures, valve seat rings, valve core, valve discs,for H type two way 2‐way one way back pressure valves, ball valve,check valve,gate valve
1.6354 Forged Forging Steel nuclear Power reactor coolant pumps Rotor Impellers
X2NiCoMo18-9-5 Forged Forging Steel Butterfly Valve Main Shafts Spindles
1.6358 Forged Forging downhole drilling tool Mud Motor Splined Drive shafts,Down hole Electric electrical submersible pumps ESP motor Splined Shaft
1.6358 Forged Forging Gas Air Compressor Rotor
1.6358 Forged Forging venturi cone meter Body Bodies Blocks
X2NiCoMo18-9-5 Forged Forging Steel gate valves Body Bodies bespoke flat bars
1.6354 forged steel Flowseal cryogenic High Performance BV Butterfly Valves HPBV shaft
1.6358 forging steel Oil measurement valve Spool Ultrasonic flow meter bodies Body
X2NiCoMo1895 Forged Forging Steel double studded adapter flange
X2NiCoMo18-9-5 Forged Forgig Steel nuclear reactor coolant pump Casing Shells body bodis blocks,nuclear reactor coolant pumps containment seal chamber Rooms,nuclear reactor coolant pumps containment seal chamber Rooms
X2NiCoMo18-9-5 Forged Forging turbomachinery turbo centrifugal compressor Impeller,Compressor Shrouded Impellers
X2NiCoMo18-9-5 Forged Forging Steel Forged Single Double Bossed boss Blanks FLANGED BOSSES
X2NiCoMo18-9-5 Forged Forging Steel PUMP Casing cover.PUMP BARREL,pump impeller,pump shafts, pump housing, pump shells,pump body,pump wear rings,pump case casing.
1.6358 Forged Forging forge Steel transition Cone
X2NiCoMo18.9.5 Forged Forging Steel Pressure Vessel Reactor Nozzles
1.6358 Forged Forging Gas Compressor Turbine Blades steel Flat Rectangles Bars
1.6354 Forged Forging Gas steam turbine disks, turbine impeller,turbine blisk,turbine discs,turbine wheel discs
X2NiCoMo18-9-5 Forging Steel Forging Forged Gas Steam Turbine Doubled-headed Double end Studs Fasteners Bolts bolting
X2NiCoMo18.9.5 Forging Steel gas steam Turbine Guide Rings,seal rings Labyrinth Rings Packing Seal Diaphragm & Seal Ring Rotor End Rings contours Casing Rings
X2NiCoMo18-9-5 Forged Forging Steel Gas Steam turbine diaphragm diapharagm nozzles
1.6358 Forged Forging Gas Turbine LPT 1st & 2st 2nd Stg Stage Turbine Case Casings
1.6358 Forged Forging Steel power plant steam turbine control reheat valve disc Disk
X2NiCoMo18-9-5 Forged forging Gas Steam Turbine Valve Spindles/Stems/Rods,
1.6358 Forging Steel Gas Steam Turbine MSV/GV/CV/CRV Valve Seats, Valve Cores, Valve Sleeves Spools,,Main Steam Valve Covers Bonnets Sleeves
1.6358 forged forging steel pipes tubes shells piping tubing barrels housing, tube sheets,baffle plates, nozzles, channel flanges for boiler, heat exchanger,pressure vessel,reactors, heaters
1.6358 is age hardenable steelproduced to create exceptional toughness and strength. With a nominal tensile strength of 300 ksi, the material can retain its tensile strength up to 450°C. The core alloying elements are iron,cobalt, nickel and molybdenum, and the product offers excellent toughness and resistance to crack propagation. The material may also be nitrided. 1.6358 can be machined close to finished dimensions as the low-temperature maraging treatment results in minimal distortion
FOllowing is chemical compostion of 1.6358,X2NiCoMo18-9-5 forged steel rings
Carbon (C%)≤0,03
Silicon (Si%)≤0,10
Manganese (Mn%)≤0,10
Phosphorus (P%)0,01
Sulfur (S%)0,01
Cobalt (Co%)8,00-10,0
Aluminum (Al%)0,05-0,15
Molybdenum (Mo%)4,50-5,50
Nickel (Ni%)17,0-19,0
Titanium (Ti%)0,50-0,80
Following of 1.6358,X2NiCoMo18-9-5 forging parts heat treatment nechanical property Delivery condition :
UTS, MPa 2,035
0.2%PS, MPa 2,000
Elongation on 4D, % 12
Charpy Notch Impact, J 17
Following is inspection standard of 1.6358,1.6354,X2NiCoMo18-9-5 forged pipes
ASTM A-370(Latest Edition): Test methods & Definitions for mechanical testing of steel products.
ASTM E8 (Latest Edition): Standard Test Methods for Tension Testing of Metallic Materials 2.8 ISO 6892-1(Latest Edition): Metallic Materials - Tensile Testing Part 1 Method Of Test AtRoom Temperature.
ISO 6506-1(Latest Edition): Metallic Materials - Brinell Hardness Test
ISO 6508-1(Latest Edition): Metallic Materials -- Rockwell Hardness Test
ISO 6507-1(Latest Edition): Metallic Materials -- Vickers Hardness Test
ASTM E10 (Latest Edition): Standard Test Method For Brinell Hardness Of Metallic Materials
ASTM E18 (Latest Edition): Standard Test Method For Rockwell Hardness Of Metallic Materials
ASTM E384 (Latest Edition): Standard Test Method For Knoop & Vickers Hardness Of Metallic Materials
ASTM A-388/388M (Latest Edition): Specification for Ultrasonic Examination of heavy steel Forgings.
ASTM E 415(Latest Edition): Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
ASTM A751 (Latest Edition): Standard Test Methods And Practices For Chemical Analysis Of Steel Product
ASTM E1086 (Latest Edition): Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
ASTM E23 (Latest Edition): Standard Test Method For Notched Bar Impact Testing Of Metallic Materials
INSP/MSC/10 (Latest Revision): Procedure for Visual Examination
HTQR/MSC/01 (Latest Revision): Heat Treatment Equipment Qualification Requirement
ASTM E2375 (Latest Revision): Standard Practice for Ultrasonic Testing of Wrought Products
ASTM E127 (Latest Revision): Standard Practice for Fabrication and Control of Flat Bottomed Hole Ultrasonic Standard Reference Blocks
ASTM E428 (Latest Revision): Standard Practice for Fabrication and Control of metal, other than aluminum, reference block used in Ultrasonic Testing
Qualification of manufacturing procedure of 1.6358,1.6354,X2NiCoMo18-9-5 forging parts
The Manufacturing Process Plan (MPP) shall be submitted to the approval of clients Material
& Process Engineering dept. clients before qualification procedure begins. It shall detail at least
the following:
• type of ingot (supplier, manufacturing process, dimensions, and tests to beperformed);
• forging process;
• heat treatment process;
• tests on component.
In general, dissection of the first piece within the terms detailed in the part specification is required.
This activity may be omitted, upon decision of clients, if the supplier has already proven to be able to successfully produce components of similar shape, dimensions and manufacturing
process.
Welcome your inquiry of 1.6358,1.6354,X2NiCoMo18-9-5,X2NiCoMo1895,X2NiCoMo18.9.5 forging forged steel parts
Following is the shape of 1.6358,1.6354,X2NiCoMo18-9-5,X2NiCoMo1895,X2NiCoMo18.9.5 forging steel material that we could do is: 1.6358 Forged Steel round bars square bars Flat bars Rectangles Bars Rods,1.6358 Forged forging steel rings seamless rolled rings,X2NiCoMo18-9-5 Forged Forging Steel Hubs housing shell Sleeves Bushes Bushing Cases Hollow Bars,X2NiCoMo18-9-5 Forged Forging Steel Discs Disks Blocks plates,1.6358 Forged Forging Steel Pipe Tubes Tubings Piping Shells Casings Case barrels Housings.
Following is forging products of 1.6358,1.6354,X2NiCoMo18-9-5,X2NiCoMo1895,X2NiCoMo18.9.5 material that is used in following industry
1.6358 Forged Forging Turbine and Compressor Labyrinth Shaft Seals
1.6358 Forged Forging Valve Balls,valve Bonnets,valve Body Bodies ,valve Stems,valve closures, valve seat rings, valve core, valve discs,for H type two way 2‐way one way back pressure valves, ball valve,check valve,gate valve
1.6354 Forged Forging Steel nuclear Power reactor coolant pumps Rotor Impellers
X2NiCoMo18-9-5 Forged Forging Steel Butterfly Valve Main Shafts Spindles
1.6358 Forged Forging downhole drilling tool Mud Motor Splined Drive shafts,Down hole Electric electrical submersible pumps ESP motor Splined Shaft
1.6358 Forged Forging Gas Air Compressor Rotor
1.6358 Forged Forging venturi cone meter Body Bodies Blocks
X2NiCoMo18-9-5 Forged Forging Steel gate valves Body Bodies bespoke flat bars
1.6354 forged steel Flowseal cryogenic High Performance BV Butterfly Valves HPBV shaft
1.6358 forging steel Oil measurement valve Spool Ultrasonic flow meter bodies Body
X2NiCoMo1895 Forged Forging Steel double studded adapter flange
X2NiCoMo18-9-5 Forged Forgig Steel nuclear reactor coolant pump Casing Shells body bodis blocks,nuclear reactor coolant pumps containment seal chamber Rooms,nuclear reactor coolant pumps containment seal chamber Rooms
X2NiCoMo18-9-5 Forged Forging turbomachinery turbo centrifugal compressor Impeller,Compressor Shrouded Impellers
X2NiCoMo18-9-5 Forged Forging Steel Forged Single Double Bossed boss Blanks FLANGED BOSSES
X2NiCoMo18-9-5 Forged Forging Steel PUMP Casing cover.PUMP BARREL,pump impeller,pump shafts, pump housing, pump shells,pump body,pump wear rings,pump case casing.
1.6358 Forged Forging forge Steel transition Cone
X2NiCoMo18.9.5 Forged Forging Steel Pressure Vessel Reactor Nozzles
1.6358 Forged Forging Gas Compressor Turbine Blades steel Flat Rectangles Bars
1.6354 Forged Forging Gas steam turbine disks, turbine impeller,turbine blisk,turbine discs,turbine wheel discs
X2NiCoMo18-9-5 Forging Steel Forging Forged Gas Steam Turbine Doubled-headed Double end Studs Fasteners Bolts bolting
X2NiCoMo18.9.5 Forging Steel gas steam Turbine Guide Rings,seal rings Labyrinth Rings Packing Seal Diaphragm & Seal Ring Rotor End Rings contours Casing Rings
X2NiCoMo18-9-5 Forged Forging Steel Gas Steam turbine diaphragm diapharagm nozzles
1.6358 Forged Forging Gas Turbine LPT 1st & 2st 2nd Stg Stage Turbine Case Casings
1.6358 Forged Forging Steel power plant steam turbine control reheat valve disc Disk
X2NiCoMo18-9-5 Forged forging Gas Steam Turbine Valve Spindles/Stems/Rods,
1.6358 Forging Steel Gas Steam Turbine MSV/GV/CV/CRV Valve Seats, Valve Cores, Valve Sleeves Spools,,Main Steam Valve Covers Bonnets Sleeves
1.6358 forged forging steel pipes tubes shells piping tubing barrels housing, tube sheets,baffle plates, nozzles, channel flanges for boiler, heat exchanger,pressure vessel,reactors, heaters
1.6358 is age hardenable steelproduced to create exceptional toughness and strength. With a nominal tensile strength of 300 ksi, the material can retain its tensile strength up to 450°C. The core alloying elements are iron,cobalt, nickel and molybdenum, and the product offers excellent toughness and resistance to crack propagation. The material may also be nitrided. 1.6358 can be machined close to finished dimensions as the low-temperature maraging treatment results in minimal distortion
FOllowing is chemical compostion of 1.6358,X2NiCoMo18-9-5 forged steel rings
Carbon (C%)≤0,03
Silicon (Si%)≤0,10
Manganese (Mn%)≤0,10
Phosphorus (P%)0,01
Sulfur (S%)0,01
Cobalt (Co%)8,00-10,0
Aluminum (Al%)0,05-0,15
Molybdenum (Mo%)4,50-5,50
Nickel (Ni%)17,0-19,0
Titanium (Ti%)0,50-0,80
Following of 1.6358,X2NiCoMo18-9-5 forging parts heat treatment nechanical property Delivery condition :
UTS, MPa 2,035
0.2%PS, MPa 2,000
Elongation on 4D, % 12
Charpy Notch Impact, J 17
Following is inspection standard of 1.6358,1.6354,X2NiCoMo18-9-5 forged pipes
ASTM A-370(Latest Edition): Test methods & Definitions for mechanical testing of steel products.
ASTM E8 (Latest Edition): Standard Test Methods for Tension Testing of Metallic Materials 2.8 ISO 6892-1(Latest Edition): Metallic Materials - Tensile Testing Part 1 Method Of Test AtRoom Temperature.
ISO 6506-1(Latest Edition): Metallic Materials - Brinell Hardness Test
ISO 6508-1(Latest Edition): Metallic Materials -- Rockwell Hardness Test
ISO 6507-1(Latest Edition): Metallic Materials -- Vickers Hardness Test
ASTM E10 (Latest Edition): Standard Test Method For Brinell Hardness Of Metallic Materials
ASTM E18 (Latest Edition): Standard Test Method For Rockwell Hardness Of Metallic Materials
ASTM E384 (Latest Edition): Standard Test Method For Knoop & Vickers Hardness Of Metallic Materials
ASTM A-388/388M (Latest Edition): Specification for Ultrasonic Examination of heavy steel Forgings.
ASTM E 415(Latest Edition): Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
ASTM A751 (Latest Edition): Standard Test Methods And Practices For Chemical Analysis Of Steel Product
ASTM E1086 (Latest Edition): Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
ASTM E23 (Latest Edition): Standard Test Method For Notched Bar Impact Testing Of Metallic Materials
INSP/MSC/10 (Latest Revision): Procedure for Visual Examination
HTQR/MSC/01 (Latest Revision): Heat Treatment Equipment Qualification Requirement
ASTM E2375 (Latest Revision): Standard Practice for Ultrasonic Testing of Wrought Products
ASTM E127 (Latest Revision): Standard Practice for Fabrication and Control of Flat Bottomed Hole Ultrasonic Standard Reference Blocks
ASTM E428 (Latest Revision): Standard Practice for Fabrication and Control of metal, other than aluminum, reference block used in Ultrasonic Testing
Qualification of manufacturing procedure of 1.6358,1.6354,X2NiCoMo18-9-5 forging parts
The Manufacturing Process Plan (MPP) shall be submitted to the approval of clients Material
& Process Engineering dept. clients before qualification procedure begins. It shall detail at least
the following:
• type of ingot (supplier, manufacturing process, dimensions, and tests to beperformed);
• forging process;
• heat treatment process;
• tests on component.
In general, dissection of the first piece within the terms detailed in the part specification is required.
This activity may be omitted, upon decision of clients, if the supplier has already proven to be able to successfully produce components of similar shape, dimensions and manufacturing
process.
Welcome your inquiry of 1.6358,1.6354,X2NiCoMo18-9-5,X2NiCoMo1895,X2NiCoMo18.9.5 forging forged steel parts
