Description
Jiangsu Liangyi professional manufacturer of AMS 5665 open die forging parts and seamless rolled steel forged rings from china
Following is the shape of AMS 5665 forging steel material that we could do is:AMS 5665 Forged Steel round bars square bars Flat bars Rectangles Bars Rods,AMS 5665 Forged forging steel rings seamless rolled rings,AMS 5665 Forged Forging Steel Hubs housing shell Sleeves Bushes Bushing Cases Hollow Bars,AMS 5665 Forged Forging Steel Discs Disks Blocks plates,AMS 5665 Forged Forging Steel Pipe Tubes Tubings Piping Shells Casings Case barrels Housings.
AMS 5665 is s a Nickel-Chromium-Iron alloy with good corrosion resistance, oxidation resistance, and high strength at high temperatures. AMS 5665 is highly resistant to chloride-ion stress-corrosion cracking due to the high nickel content. Age-hardening treatments are not required, as AMS 5665 is hardened and strengthened through cold work only. AMS 5665 can operate from cryogenic temperatures to 700°F (370°C).
FOllowing is melting methods of AMS 5665 forged parts
Material shall be produced by a triple melt process consisting of vacuum induction melting (VIM)followed by electroslag consumable electrode remelting (ESR)and vacuum arc consumable electrode remelting VAR).
FOllowing is chemical compostion of AMS 5665 forged steel rings
Cr: 14.0 – 17.0
Fe: 6.0 – 10.0
Mn: 1.0 max
Ni: 72 min
Cu: 0.5 max
Si: 0.5 max
C: 0.15 max
S: 0.015 max
Following of AMS 5665 forging parts heat treatment nechanical property Delivery condition :
UTS ksi (MPa) 80-100 (550-690)
YS ksi (MPa) 25-50 (170-345)
Elong., % 55-35
Rockwell Hardness 65-85B
METALLURGICAL EXAMINATION of AMS 5665 forging parts
Macro etch testing shall be carried out with 100 %surface coverage on each part after test ring removal and rough machining,leaving a minimum of stock over part of 0.50 mm.
The microstructure shall be examined within areas marked on drawing. The microstructure shall also be examined within areas where the macro etch testing has revealed deviations from normal structure.
Representative photomicrographs shall be included with the test certificates and submitted for approval to the Quality Department.
At least four metallographic samples,shall be removed from the test ring,at 90 degrees apart and examined at 100X magnification.These samples shall be viewed in the radial direction of the disc forging.
MACROSCOPIC EXAMINATION of AMS 5665 forging naterial
100 %surface coverage on each forging after rough machining shall be inspected.The Macro Etching procedure shall be approved
Forging of ams 5665 forged parts shall be free of segregation,voids,non-metallic inclusions,dirt and dross,pipe and other injurious imperfections after macro etching and examination at 1X magnification.
Imperfections must not exceed given degrees of severity (ASTM A604M)in accordance with Table 1 NOTE
All dark etching areas shall be subject to a microscopic examination.The following white spot conditions shall be subject to microscopic examination to confirm their nature and size:
· White spots larger than 2.5 mm or more than 4 per side;
· White spots distribution closer than that shown by ASTM A 604,Class 2-White Spot-Severity B.
Following is forging products of AMS 5665 material that is used in following industry
AMS 5665 Forged Forging Valve Balls,valve Bonnets,valve Body Bodies ,valve Stems,valve closures, valve seat rings, valve core, valve discs,for H type two way 2‐way one way back pressure valves, ball valve,check valve,gate valve
AMS 5665 Forged Forging Steel nuclear Power reactor coolant pumps Rotor Impellers
AMS 5665 forged steel Mechanical Seal Discs
AMS 5665 Forged Forging Steel Butterfly Valve Main Shafts Spindles
AMS 5665 Forged Forging Swept branches outlets steel fittings swept saddles
AMS 5665 Forged Forging Steels Christmas Trees wellhead Spool Body Bodies cylinder
AMS 5665 Forged Forging venturi cone meter Body Bodies Blocks
AMS 5665 Forged Forging Steel gate valves Body Bodies bespoke flat bars
AMS 5665 forging steel Oil measurement valve Spool Ultrasonic flow meter bodies Body
AMS 5665 Forged Forging Steel double studded adapter flange
AMS 5665 Forged Forging Steel integral Mud Flange Flanged outlet Studded crosses
AMS 5665 Forged Forging Steel Casing Heads,Tubing Heads,Casing Hangers,Tubing Hangers,Tubing Spools,Casing Spools,Spacer Spools
AMS 5665 Forged Forgig Steel nuclear reactor coolant pump Casing Shells body bodis blocks,nuclear reactor coolant pumps containment seal chamber Rooms,nuclear reactor coolant pumps containment seal chamber Rooms
AMS 5665 Forged Forging Steel Forged Single Double Bossed boss Blanks FLANGED BOSSES
AMS 5665 Forged Forging Steel PUMP Casing cover.PUMP BARREL,pump impeller,pump shafts, pump housing, pump shells,pump body,pump wear rings,pump case casing.
AMS 5665 Forged Forging forge Steel transition Cone
AMS 5665 Forged Forging Steel Pressure Vessel Reactor Nozzles
AMS 5665 Forged Forging Gas Compressor Turbine Blades steel Flat Rectangles Bars
AMS 5665 forged forging steel pipes tubes shells piping tubing barrels housing, tube sheets,baffle plates, nozzles, channel flanges for boiler, heat exchanger,pressure vessel,reactors, heaters
AMS 5665 forged material for nuclear power such as :Flow limiter Venturi forgings (steam generator)，Forged tubes for pressurizer surge line，reactor nozzles and primary pump fly wheels， divider plates for steam generator，Latch housings, rod travel housings and funnel extension,end ring and rotor stack plate forgings,bearing housings and stator end cap and closure ring forgings,Containment plates, rings and closure heads,Waste Flasks and Mounting Skirt,RPV Upper Shell and HSG Shell,Shell Strakes and Transition Cones,Pressure Components,Lifting Pin Tools and Trunnions,Pressuriser Upper Head and Upper Shell,Steam Drumhead and Lifting Pintle
Welcome your inquiry of AMS 5665 forging forged steel parts
Following is the shape of AMS 5665 forging steel material that we could do is:AMS 5665 Forged Steel round bars square bars Flat bars Rectangles Bars Rods,AMS 5665 Forged forging steel rings seamless rolled rings,AMS 5665 Forged Forging Steel Hubs housing shell Sleeves Bushes Bushing Cases Hollow Bars,AMS 5665 Forged Forging Steel Discs Disks Blocks plates,AMS 5665 Forged Forging Steel Pipe Tubes Tubings Piping Shells Casings Case barrels Housings.
AMS 5665 is s a Nickel-Chromium-Iron alloy with good corrosion resistance, oxidation resistance, and high strength at high temperatures. AMS 5665 is highly resistant to chloride-ion stress-corrosion cracking due to the high nickel content. Age-hardening treatments are not required, as AMS 5665 is hardened and strengthened through cold work only. AMS 5665 can operate from cryogenic temperatures to 700°F (370°C).
FOllowing is melting methods of AMS 5665 forged parts
Material shall be produced by a triple melt process consisting of vacuum induction melting (VIM)followed by electroslag consumable electrode remelting (ESR)and vacuum arc consumable electrode remelting VAR).
FOllowing is chemical compostion of AMS 5665 forged steel rings
Cr: 14.0 – 17.0
Fe: 6.0 – 10.0
Mn: 1.0 max
Ni: 72 min
Cu: 0.5 max
Si: 0.5 max
C: 0.15 max
S: 0.015 max
Following of AMS 5665 forging parts heat treatment nechanical property Delivery condition :
UTS ksi (MPa) 80-100 (550-690)
YS ksi (MPa) 25-50 (170-345)
Elong., % 55-35
Rockwell Hardness 65-85B
METALLURGICAL EXAMINATION of AMS 5665 forging parts
Macro etch testing shall be carried out with 100 %surface coverage on each part after test ring removal and rough machining,leaving a minimum of stock over part of 0.50 mm.
The microstructure shall be examined within areas marked on drawing. The microstructure shall also be examined within areas where the macro etch testing has revealed deviations from normal structure.
Representative photomicrographs shall be included with the test certificates and submitted for approval to the Quality Department.
At least four metallographic samples,shall be removed from the test ring,at 90 degrees apart and examined at 100X magnification.These samples shall be viewed in the radial direction of the disc forging.
MACROSCOPIC EXAMINATION of AMS 5665 forging naterial
100 %surface coverage on each forging after rough machining shall be inspected.The Macro Etching procedure shall be approved
Forging of ams 5665 forged parts shall be free of segregation,voids,non-metallic inclusions,dirt and dross,pipe and other injurious imperfections after macro etching and examination at 1X magnification.
Imperfections must not exceed given degrees of severity (ASTM A604M)in accordance with Table 1 NOTE
All dark etching areas shall be subject to a microscopic examination.The following white spot conditions shall be subject to microscopic examination to confirm their nature and size:
· White spots larger than 2.5 mm or more than 4 per side;
· White spots distribution closer than that shown by ASTM A 604,Class 2-White Spot-Severity B.
|
CLASS |
CONDITION |
MAX ACCEPTABLE DEGREE OF SEVERITY |
|
1 |
FRECKLES |
A |
|
2 |
WHITE SPOT |
A |
|
3 |
RADIAL SEGREGATION |
NOT ALLOWED |
|
4 |
RING PATTERN |
C |
Following is forging products of AMS 5665 material that is used in following industry
AMS 5665 Forged Forging Valve Balls,valve Bonnets,valve Body Bodies ,valve Stems,valve closures, valve seat rings, valve core, valve discs,for H type two way 2‐way one way back pressure valves, ball valve,check valve,gate valve
AMS 5665 Forged Forging Steel nuclear Power reactor coolant pumps Rotor Impellers
AMS 5665 forged steel Mechanical Seal Discs
AMS 5665 Forged Forging Steel Butterfly Valve Main Shafts Spindles
AMS 5665 Forged Forging Swept branches outlets steel fittings swept saddles
AMS 5665 Forged Forging Steels Christmas Trees wellhead Spool Body Bodies cylinder
AMS 5665 Forged Forging venturi cone meter Body Bodies Blocks
AMS 5665 Forged Forging Steel gate valves Body Bodies bespoke flat bars
AMS 5665 forging steel Oil measurement valve Spool Ultrasonic flow meter bodies Body
AMS 5665 Forged Forging Steel double studded adapter flange
AMS 5665 Forged Forging Steel integral Mud Flange Flanged outlet Studded crosses
AMS 5665 Forged Forging Steel Casing Heads,Tubing Heads,Casing Hangers,Tubing Hangers,Tubing Spools,Casing Spools,Spacer Spools
AMS 5665 Forged Forgig Steel nuclear reactor coolant pump Casing Shells body bodis blocks,nuclear reactor coolant pumps containment seal chamber Rooms,nuclear reactor coolant pumps containment seal chamber Rooms
AMS 5665 Forged Forging Steel Forged Single Double Bossed boss Blanks FLANGED BOSSES
AMS 5665 Forged Forging Steel PUMP Casing cover.PUMP BARREL,pump impeller,pump shafts, pump housing, pump shells,pump body,pump wear rings,pump case casing.
AMS 5665 Forged Forging forge Steel transition Cone
AMS 5665 Forged Forging Steel Pressure Vessel Reactor Nozzles
AMS 5665 Forged Forging Gas Compressor Turbine Blades steel Flat Rectangles Bars
AMS 5665 forged forging steel pipes tubes shells piping tubing barrels housing, tube sheets,baffle plates, nozzles, channel flanges for boiler, heat exchanger,pressure vessel,reactors, heaters
AMS 5665 forged material for nuclear power such as :Flow limiter Venturi forgings (steam generator)，Forged tubes for pressurizer surge line，reactor nozzles and primary pump fly wheels， divider plates for steam generator，Latch housings, rod travel housings and funnel extension,end ring and rotor stack plate forgings,bearing housings and stator end cap and closure ring forgings,Containment plates, rings and closure heads,Waste Flasks and Mounting Skirt,RPV Upper Shell and HSG Shell,Shell Strakes and Transition Cones,Pressure Components,Lifting Pin Tools and Trunnions,Pressuriser Upper Head and Upper Shell,Steam Drumhead and Lifting Pintle
Welcome your inquiry of AMS 5665 forging forged steel parts
