Description
We are professional Forging Steel Hydro Turbine upper thrust ring, Forged Steel HYDROPOWER Turbine lower thrust ring, Forging Steel Hydro turbine Wear Ring,Forged Steel Water turbine Gate shift rings .Forging Steel hydro turbine Discharge rings from china
The maximum diameter of Forged Forging Hydro Turbine upper thrust ring lower thrust ring Wear Ring Gate shift rings Discharge rings that we could produce is up to 2.5 meter
The maximum weight of Forged Forging Hydro Turbine upper thrust ring lower thrust ring Wear Ring Gate shift rings Discharge rings that we could produce is up to 40 tons
We could forged, normalized, machined,quenching and tempering and final machined hydro turbine shafts as per drawing of clients
FOllowing is main shafts that used in Forged Forging Hydro Turbine upper thrust ring lower thrust ring Wear Ring Gate shift rings Discharge rings
ASTM A668 / A668M CL C cl E Cl D CL F Class E Class D CLass C
P355QH;
C35;
C45;
S355J2G3
42CrMo4
30CrNiMo8
20MnSi
20Mn5
17-4ph
AISI 630
34CrNiMo6
1.2343
A182-F6NM
ASTM A743 CA6NM
UNS S41500
1.4313
X3CrNiMo13-4
FOllowing is melting methods for all Forged Forging Hydro Turbine upper thrust ring lower thrust ring Wear Ring Gate shift rings Discharge rings as per client choices
1 EAF: Electric Arc Furnace
2 EAF+LF+VD: Refined-smelting and vacuum degassing
3 EAF+ESR: Electro Slag Remelting
4 EAF+PESR: protective atmosphere Electro Slag Remelting
5 VIM+PESR: Vacuum induction melting
All our Forged Forging Hydro Turbine upper thrust ring lower thrust ring Wear Ring Gate shift rings Discharge rings will have following testing procedure
Visual inspections – Direct and Indirect
Magnetic particle
Dye penetrant – Visible and Fluorescent
Ultra-sonic testing
Radiograph
Metallurgical Testing
Macro & micro
Grain size determination
Charpy Impact testing
V notch Charpy
Hardness testing including micro and
macro Vickers tests
Tensile testing
Microscope imaging
ALl our finished producrtion of Forged Forging Hydro Turbine upper thrust ring lower thrust ring Wear Ring Gate shift rings Discharge rings should have inspection certificate as per 3.1B of EN 10204 shall be provided to clients in triplicate;this certificate must contain the following dala:
(a)Material code no and P.O.number
(b)Material designation
(c)Heat no.,heat analysis and melting methods
(d)Table with the single results for determination pf the purity grade at microsections and value of purity grade K1
(e)Mechanical test results including hardness range
(f)Complete information on all heat treatments performed
(g)Results of NDT tests performed
(h)Confimation of material identification check
(i)Confirmation of dimensional and visual check
Welcome your inquiry of Forged Forging Hydro Turbine upper thrust ring lower thrust ring Wear Ring Gate shift rings Discharge rings
